STEP 12 : Install the Floppy Drive

 

  1. Choose which drive bay you want to install the drive to and remove the face plate off of that bay. Save the face plate for future use. Pick a bay that will fit the drive. If you have to install a 3.5" drive in a 5.25" bay, you'll have to use a special front panel to adapt it. This panel usually comes with a new floppy drive.

 

  1. Now, slide the drive into the bay from the front. If your particular case has a drive rack, then you may need to remove the rack from the system and then screw the drive into the rack separately from the actual case. Otherwise, screw the drive into the case itself. Before doing so, make sure the front of the drive is flush with the front of the PC.
  2. If you are using brackets to hold the drive in place, secure them now. You may need to temporarily disconnect the cables. Once in, tighten the drive in place. Double-check the connections, also checking the connections for other drives to make sure you didn't bump one out of place.
  3. Now, the floppy disk drive should be installed properly.
  4. OPTIONAL : If you are installing a 3.5” internal ZIP drive, you install it the same way and into the second floppy drive bay of your case.

 

  1. STEP 1 : Purchase/Collect The Components
  2. STEP 2 : Remove Case Cover
  3. STEP 3 : Case Preparation
  4. STEP 4 : Configure Your Motherboard
  5. STEP 5 : Install the CPU
  6. STEP 6 : Install Heat Sink/Fan
  7. STEP 7 : Install the Cache Module
  8. STEP 8 : Install Memory
  9. STEP 9 : Install the Motherboard
  10. STEP 10 : Install the I/O Connectors & Mouse
  11. STEP 11: Hook the Motherboard to the Case
  12. STEP 12 : Install Floppy Drive
  13. STEP 13 : Configure the Hard Drive & CD-ROM
  14. STEP 14 : Mount Hard Drive
  15. STEP 15 : Install the CD-ROM(s)
  16. STEP 16 : Connect the Floppy Drive
  17. STEP 17 : Connect the Hard Drive
  18. STEP 18 : Connect the CD Drive(s)
  19. STEP 19 : Install The Video Card
  20. STEP 20 : Post-Assembly
  21. STEP 21 : Initial Boot-Up
  22. STEP 22 : Configure The BIOS
  23. STEP 23 : Test The System
  24. STEP 24 : Prepare the Hard Drive
  25. STEP 25 : Install The CD-ROM Driver
  26. STEP 26: Install The Operating System
  27. STEP 27: Tweak Your Creation

E-mail | Main Menu | Components

VAT Included in all prices!