STEP 27: Tweak Your Creation

 

 

 

 

 

Now you have a PC which you built and it is now running with a newly installed operating system. Great job! Now you are ready to get the PC set up as you want it. This will include installing any additional hardware and software, adjusting any default Windows settings you don’t like, upgrading drivers. If you installed an older Windows version, you might want to use Windows Update to upgrade some of the core components as well as basics like Internet Explorer. You’ll definitely want to get a modem installed (if you have not done so already) and hook the PC up to the internet. This is your prime way of updating software and is highly important.

I leave the rest up to you. I hope you found this tutorial useful, as I’m sure you can tell from the length of it that it is very long and very in-depth. Enjoy your new PC!

  1. STEP 1 : Purchase/Collect The Components
  2. STEP 2 : Remove Case Cover
  3. STEP 3 : Case Preparation
  4. STEP 4 : Configure Your Motherboard
  5. STEP 5 : Install the CPU
  6. STEP 6 : Install Heat Sink/Fan
  7. STEP 7 : Install the Cache Module
  8. STEP 8 : Install Memory
  9. STEP 9 : Install the Motherboard
  10. STEP 10 : Install the I/O Connectors & Mouse
  11. STEP 11: Hook the Motherboard to the Case
  12. STEP 12 : Install Floppy Drive
  13. STEP 13 : Configure the Hard Drive & CD-ROM
  14. STEP 14 : Mount Hard Drive
  15. STEP 15 : Install the CD-ROM(s)
  16. STEP 16 : Connect the Floppy Drive
  17. STEP 17 : Connect the Hard Drive
  18. STEP 18 : Connect the CD Drive(s)
  19. STEP 19 : Install The Video Card
  20. STEP 20 : Post-Assembly
  21. STEP 21 : Initial Boot-Up
  22. STEP 22 : Configure The BIOS
  23. STEP 23 : Test The System
  24. STEP 24 : Prepare the Hard Drive
  25. STEP 25 : Install The CD-ROM Driver
  26. STEP 26: Install The Operating System
  27. STEP 27: Tweak Your Creation

E-mail | Main Menu | Components

VAT Included in all prices!